Klempířský obrubovací stroj XBC 100/400

Machine is supposed to flange, to level circuit metal sheets, bottoms of vessels etc, to roll-in wire, or to cut metal sheets of 800 MPa up to thickness of 2 mm or 400 MPa up to 3 mm.

The main part of the machine is a frame which bears the shanks with their train of gears, the system for moving the lower shaft and moving up and down the upper one. At the back side, a gear box is fitted including its electric motor. The machine frame is mounted on a hug sheet pedestal. The machine is featured with a foot control device which operates the machine to turn right or left. The roller speed can be adjusted by using a frequency converter from 15,5 to 46,5 rpm.

    100/400 100/400P 100/400M
Thickness of processed material 400 MPa 3 mm 3 mm 3 mm
  800 MPa 2 mm 2 mm 2 mm
Axial distance of shafts   95 mm 95 mm 95 mm
Working depth   400 mm 400 mm 400 mm
Turns of shafts   15,5 až 46,5 ot-1
Main motor input   1,1 kW 1,1 kW 1,1 kW
Pressing - down motor input   - - 0,120 kW
Pressure of the head by 0,6 MPa   - 12 kN -
Electricity   230 V/50Hz 230 V/50Hz 400 V/50Hz
Machine sizes lenght 840 mm 840 mm 840 mm
  width 670 mm 670 mm 670 mm
  heigth 1300 mm 1460 mm 1460 mm
Machine weight   200 kg 210 kg 210 kg

Groove shapes

Click and open view menu of wheels for demanded groove.

  Groove shape  
  Groove shape  
  Groove shape  
  Groove shape  
  Groove shape  
  Groove shape  
  Groove shape