Klempířský obrubovací stroj XBC 56/300

The machine is to be used for flanging, inserting, encircling, and planing of metal sheets, for sealing of bottoms, inserting metal wires, and cutting metal sheet up to 1,2 mm at a hardness of 400 MPa.

The main part of the machine is a frame which bears the shanks with their train of gears, the system for moving the lower shaft and moving up and down the upper one. At the back side, a gear box is fitted, including its electric motor. The machine frame with its gear box is mounted on a huge sheet pedestal. The machine is featured with a foot control device which operates the machine to turn right or left. |The roller speed can be stepless adjusted. Special wrench for roller changing and a twin food switch. The XBC machine is featured with a frequency converter and the machine speed may be steplessly adjusted.
The XBC2 56/300 machine is a two- speed machine.

XBC 56/300 XBC2 56/300
Axial distance of shafts 56 mm 56 mm
Working depth 300 mm 300 mm
Turns of shafts 25 až 85 35/70
Working speed (m/min) 4,4 až 14,9 6/12,3
Motor input 0,37 kW 0,25/0,37 kW
Electricity 230 V 400 V
Machine sizeslength700 mm 700 mm
width450 mm 400 mm
height650 mm 650 mm
Weight 78 kg 75 kg

It is possible to supply 12 pairs standart forming rollers along with machine which however are not included into machine unit price. Other shapes of rollers may be done on request.

Groove shapes

Click and open view menu of wheels for demanded groove.

  Groove shape  
  Groove shape  
  Groove shape  
Groove shape
  Groove shape  
  Groove shape  
  Groove shape  
  Groove shape